Industrial Products / Backplane / For 2,5" HDD
JJ-1012M-SS SATA+SAS 12x2,5"HDDitem number: A 2369
- For 12 x 2.5"SATA(SAS) HDD/SSD
- Side sliding rails with vibration reducing springs
- Support SATA and SAS primary channel
- 8 *8cm fan * 1 with High/Low speed switch
- Metal Key Lock for each HDD tray The JJ-1012M-SS allows up to 12 SATA or SAS drives to be installed into any 3 x 5.25 inch device bays for a convenient data exchange. Choice model for the multi-bay 2.5" HDD backplane. Simply rugged and high anti-vibration standard product and worry-free of the heat and vibration! Now an IPC industrial standard also for SoHo and consumers.
JJ-1041SS SATA+SAS 4x2,5"HDD RoHSitem number: A 2061
- Industrial standard
- Anti-shock protection
- HDD thickness up to 15mm
- Cableless HDD connection
- Optimal cooling due to 2 x 4cm fan and air ventilation holes for best heat sink
- Security triangle keylock for each HDD tray
JJ-1044M-SS SATA+SAS 4 x 2,5" HDDitem number: A 2273
- For 4 x 2,5 SATA(SAS) HDD/SSD
- Simply rugged and high anti-vibration standard and worry-free of the heat and vibration!
- Support SATA and SAS primary channel
- IPC industrial standard for SOHO and consumers
- Providing two ways mounting holes - from sides or bottom
- Easy drives swap in / out or for tray transportation
- Side sliding rails with vibration reducing springs
- For data backup, duplication, transportation, security, DVR, testing and consummers.
JJ-1060 SATA 6x2,5"HDD for 5,25" RoHSitem number: A 1734
- Removable mini backplane for 6 x 2.5" HDD
JJ-1080M-SS SATA+SAS 8x2,5"HDDitem number: A 2274
- For 8 x 2,5 SATA(SAS) HDD/SSD
- Simply rugged with high anti-vibration standard and worry-free of the heat and vibration!
- IPC industrial standard for soho and consumers
- For data backup, duplication, transportation, security, DVR and testing purposes
- Easy drives swap in / out or for tray transportation
- Side sliding rails with vibration reducing springs
- Metal keylock for security
JJ-127SS 12G SATA+SAS 12x2,5"HDDitem number: A 2559
- Support up to 12Gbps (SAS III)
- 3 x 5.25" Bay for 12 x 2.5" HDD/SSD
- 3 x MiniSAS HD (SFF-8643) interface
- Supported HDD height upto 15mm The Jou Jye aluminum backplane JJ-127SS supports up to 12Gbit/s and can host up to twelve hot-swap SATA/SAS HDD or SSD in one 5.25" bay. The front ventilating holes and the horizontal PCB design enhance the air flow inside, while the rear fan amplifies the cooling performance of this device. Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray. This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller. Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.
JJ-1x25SS-WT 1x SSD/HDD backplane moduleitem number: A 2627
- Super Thin / Special size
- For 1 x 2,5" SSD/HDD
- For up to 7mm SSD/HDD
- Support Upto SATA-III 6G & SAS 6Gbps (SAS-II)
- 7pin data connector x 1
- Mini 4pin power
- Dimension: 138(L) x 72.5(W) x 11.5(H)mm
JJ-1x25SS-WT-P 1x SSD/HDD backplane module w/PCI bracketitem number: A 2636
- Super Thin / Special size with PCIE Bracket
- For 1 x 2,5 SSD/HDD
- Support Upto SATA-III 6G & SAS 6Gbps (SAS-II)
- For up to 7mm SSD/HDD
- 7pin data connector x 1
- Mini 4pin power
- Dimension: 138(L) x 72.5(W) x 11.5(H)mm
JJ-47SS 12G SATA+SAS 4x2,5"HDDitem number: A 2557
- Support up to 12Gbps (SAS III)
- 1 x 5.25" Bay for 4 x 2.5" HDD/SSD
- 1 x MiniSAS HD (SFF-8643) interface
- Supported HDD height up to 15mm The Jou Jye aluminum backplane JJ-47SS supports up to 12Gbit/s and can host up to four hot-swap SATA/SAS HDD or SSD in one 5.25" bay. The front ventilating holes and the horizontal PCB design enhance the air flow inside, while two rear fans amplify the cooling performance of this device. Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray. This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller. Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.
JJ-4x25SS-WT 4x SSD/HDD backplane moduleitem number: A 2628
- Super Thin / Special size
- For 4 x 2,5 SSD/HDD
- For up to 7mm SSD/HDD
- Support Upto SATA-III 6G & SAS 6Gbps (SAS-II)
- 7pin data connector x 4
- SATA 15pin power x 1
- Dimension: 138(L) x 72.5(W) x 40.2(H)mm
JJ-52SSU3 SAS/SATA 2x2,5" HDD+4xUSB3.0 Blackitem number: A 2569
- 1 x 5,25" for 2 x 2,5" HDD/SSD + 4 x USB3.0
- Support SAS (III/II/I) SATA (III/II/I), 12Gbps
- Hot-swap dual channel SAS/SATA interface
- Support up to 15mm HDD height
- Metal key lock design
- Anti-vibration & EMI Grounding structure
- Multi colour LED indicator This module is an ideal solution to upgrade your system with an enterprise graded backplane, which enables two pieces 2,5" SAS/SATA HDD/SSD to match in a 5,25" standard form factor drive bay and to enjoy up to 12Gbps data transfer. Besides, you can benefit of four SuperSpeed USB3.0 ports, of course downward compatible with USB2.0. The anti-vibration design absorbs the vibrations arising from the hard drives during operation and contributes decisively to reduce the noise. This high reliable module is equipped with a 2-segment metal key lock to safeguards the hard drives from unauthorized personnel.
JJ-87SS 12G SATA+SAS 8x2,5"HDDitem number: A 2558
- Support up to 12Gbps (SAS III)
- 2 x 5.25" Bay for 8 x 2.5" HDD/SSD
- 2 x MiniSAS HD (SFF-8643) interface
- Supported HDD height up to 15mm The Jou Jye aluminum backplane JJ-87SS supports up to 12Gbit/s and can host up to eight hot-swap SATA/SAS HDD or SSD in one 5.25" bay. The front ventilating holes and the horizontal PCB design enhance the air flow inside, while the rear fan amplifies the cooling performance of this device. Hard drives are properly led into the cableless connection through guiding rails and are protected by anti-vibration springs on the HDD tray. This backplane features one rear miniSAS HD (SFF-8643) interface for connecting to a compatible controller. Moreover, safety and protection are provided by the metal keylock design, to prevent unauthorised access.
JJ-8x25SS-WT 8 x SSD/HDD backplane moduleitem number: A 2635
- 1 x 5.25 Bay for 8 x 2,5 SSD/HDD
- Support Upto SATA-III 6G & SAS 6Gbps (SAS-II)
- For up to 7mm SSD/HDD
- 7pin data connector x 8
- SATA 15pin power x 2
- Dimension: 159(L) x 146(W) x 42(H)mm
Industrial Products / Backplane / For 3,5" HDD - SATA / SAS
JJ-2132M-SS SATA+SAS, black 2/3 HDDitem number: A 2275
- Anti-vibration design
- Double HDD tray security / metal lock and sliding lock
- Suitable for both 3,5" and 2,5" HDD/SSD
- Easy swapping in/out
- Aluminum body and Aluminum tray
- For IPC industrial standard and SoHo The Railway Series can host upto 3 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 2 x 5,25" bay space. This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design. The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing. The Railway backplanes are recommended for industrial and common use.
JJ-3052M-SS SATA+SAS, black 3/5 HDDitem number: A 2277
- Anti-vibration design
- Double HDD tray security / metal lock and sliding lock
- Suitable for both 3,5" and 2,5" HDD/SSD
- Easy swapping in/out
- Aluminum body and Aluminum tray
- For IPC industrial standard and SoHo The Railway Series can host upto 5 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 3 x 5,25" bay space. This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design. The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing. The Railway backplanes are recommended for industrial and common use.
JJ-3142M-SS SATA+SAS, black 3/4 HDDitem number: A 2276
- Anti-vibration design
- Double HDD tray security / metal lock and sliding lock
- Suitable for both 3,5" and 2,5" HDD/SSD
- Easy swapping in/out
- Aluminum body and Aluminum tray
- For IPC industrial standard and SoHo The Railway Series can host upto 4 x 3,5" or 2,5" SATA/SAS drives and can be installed into any 3 x 5,25" bay space. This simply rugged backplane series, with the revolutionary anti-vibration spring rails, protects your hard drive and connector against damage, while your data keep safe and cool thanks the high stability and heat-dissipation design. The backplanes are equipped with LED indication for fan failure and overheating and each drive with an individual LED indication for power on and blinking for accessing. The Railway backplanes are recommended for industrial and common use.
JJ-M0104 1U 4x3,5"HDD Backplane moduleitem number: A 2448
- Backplane module for 4 x 3.5"(or 2.5") HDD/SSD
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- Full SAS dual channel
- Hot swappable HDD tray
Features of the storage module.
- Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD This storage module has been designed for hosting 4x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-M0112 1U 12x2,5"HDD Backplane moduleitem number: A 2512
- Backplane module for 12 x 2.5" HDD/SSD
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- Full SAS dual channel
- Hot swappable HDD tray
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indication for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs
This storage module has been designed for hosting 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-M0208 2U 8x3,5"HDD Backplane moduleitem number: A 2449
- Backplane module for 8 x 3.5"(or 2.5") HDD/SSD
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- Full SAS dual channel
- Hot swappable HDD tray
Features of the Storage Module - Organised group for miniSAS connections - Digital numbers for group or RAID organising - LED indication for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexible to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD - Stainless HDD tray with plastic handle and security keylock
This storage module has been designed for hosting 8x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-M0212 2U 12x3,5"HDD Backplane moduleitem number: A 2450
- Backplane module for 12 x 3.5"(or 2.5") HDD/SSD
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- Full SAS dual channel
- Hot swappable HDD tray
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indication for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD
This storage module has been designed for hosting 12x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-M0224 2U 24x2,5"HDD Backplane moduleitem number: A 2513
- Backplane module for 24 x 2.5" HDD/SSD
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- Full SAS dual channel
- Hot swappable HDD tray
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indication for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs
This storage module has been designed for hosting 24 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
ST-2131SS SATA /SAS, beige 2/3 HDD RoHSitem number: A 1327
- Cableless connection
- Fan failure sensor
- Overheating alarm
- Optimal cooling due to 8 cm turbo cooling fan
ST-2131SS SATA/SAS, black 2/3 HDD RoHSitem number: A 1328
- Cableless connection
- Suitable for both 3,5" and 2,5" HDD/SSD
- Fan failure sensor
- Overheating alarm
- Optimal cooling due to 8 cm turbo cooling fan
ST-2335TL SATA/SAS trayless black 2/3HDDitem number: A 2156
- Black aluminum-body with Black panel
- Trayless design for 3.5" HDD
- Triangle metal key-lock design
- Support SATAI/II/III
- 2 * 5.25Bay for 3*3.5" Hard drives
- 15pin SATA-power connector
- With 70x70x15mm (2800RPM) Cooling Fan
- With HDD LED & Fan Control Switch
ST-3051SS SATA/SAS -3bay/5HDD black RoHSitem number: A 1337
- Sata to Sata and SAS
- Suitable for both 3,5" and 2,5" HDD/SSD
- Cableless connection
- Fan failure sensor
- Overheating alarm
- Optimal cooling due to 8 cm turbo cooling fan
ST-3141SS SATA /SAS, beige 3/4 HDD RoHSitem number: A 1355
- Cableless connection
- Fan failure sensor
- Overheating alarm
- Optimal cooling due to 8 cm turbo cooling fan
ST-3141SS SATA /SAS, black 3/4 HDD RoHSitem number: A 1329
- Cableless connection
- Suitable for both 3,5" and 2,5" HDD/SSD
- Fan failure sensor
- Overheating alarm
- Optimal cooling due to 8 cm turbo cooling fan
ST-3435TL SATA/SAS trayless black 3/4HDDitem number: A 2157
- Black aluminum-body with Black panel
- Trayless design for 3.5" HDD
- Triangle metal key-lock design
- Support SATAI/II/III
- 3 * 5.25Bay for 4*3.5" Hard drives
- 15pin SATA-power connector
- With 2400RPM 8*8cm Cooling Fan
- With HDD LED & Fan Control Switch
ST-3535TL SATA/SAS trayless black 3/5HDDitem number: A 2572
- Black aluminum-body with Black panel
- Trayless design for 3.5" HDD
- Triangle metal key-lock design
- Support SATAI/II/III
- 3 x 5,25" Bay for 5 x 3.5" Hard drives
- 15pin SATA-power connector
- With 2400RPM 8*8cm Cooling Fan
- With HDD LED & Fan Control Switch
Industrial Products / Mobile Rack / For 2,5" HDD
JJ-2225TL SATA Mobile Rack black RoHSitem number: A 2367
- 2 x 2.5" HDD (SSD*) aluminum mobile rack with keylock
- Enables 2.5" SATA HDD/SSD* to be fit on a 3.5" standard form factor drive bay (floppy size space) in any desktop PC or rackmount chassis
- Reliable metal key lock to safeguard the HDD/SSD
- Support up to 9.5mm height
- Support SATAI/II/III HDD/SSD, 6Gbps
- Cableless HDD connection
- Enhanced air flow design
- With LED switch Trayless design to enhance the airflow and high quality aluminum body to maximize heat sinking. An ideal solution for any floppy-swap-bay for high-end applications, SoHo and consumers. *SSD Solid State Drive (flash based drive)
ST-1111SS SATA/SAS Mobile rack black RoHSitem number: A 1879
- 1 x 2.5" HDD(SSD) built on a convenient 3.5" mobile rack
- Compatible with SATA-III 6.0 Gbit/s, SAS II 6.0 Gbit
- It can support the HDD height from 9.5mm ~ 15mm
- Supports SATA, SAS 2.5" HDD and SATA SSD
- Cableless HDD connection
Industrial Products / Mobile Rack / For 3,5" HDD
JJ-137M-SS SATA/SAS, Alu black RoHSitem number: A 2368
- Support SATAI/II/III & SAS I,II 6Gbps
- With rugged anti-vibration level guiding rails to absorb all direction vibration
- For 1 x 2,5 or 3,5 SSD/HDD in 1x5,25 bay HDD mobile rack with easy swap in/out tray for data backup, duplication, security, DVR or testing, for industrial and consumer purposes. Built up a reliable enterprise data center for large-scale replicated environments on this rugged anti-vibration module(s).
JJ-M0101 Single HDD rack blackitem number: A 2435
- Single HDD rack for 3,5" or 2,5"
- Support SATA III and SAS II, 6Gbps
- With Anti-vibration springs and cushion points
JJ-N-11WM 12G SATA+SAS Alu black RoHSitem number: A 2668
- Compatible with SAS-III and SATA-III 3,5 HDD
- SAS-I,II,III (12Gbps) SATA-I,II,III (6Gbps),
- Optimal cooling due to 1 x 4cm front fan
- Aluminum body, aluminum HDD tray
- Cableless HDD connection
- Magic handle - auto in/out
JJ-N-16TM 12G SATA+SAS Alu black RoHSitem number: A 2669
- Compatible with SAS-III and SATA-III 2,5and 3,5 HDD/SSD
- SAS-I,II,III (12Gbps), SATA-I,II,III (6Gbps)
- Aluminum body, tray and front bezel
- Cableless HDD connection
- With metal keylock and sliding door lock
- With guiding rail for anti-vibration design
ST-1120SS SATA for 1U black RoHSitem number: A 2492
- Aluminum
- For 1 x 3,5 or 2,5 / With keylock
- Support SATA & SAS 6Gbps
- Cableless connection
- Anti-vibration guiding rails Mechnical keylock & sliding door for safety Supports Plug & Play / hot swappable With 2 LED for Power & HDD access
ST-133 ATA133,1*fan, Alu,IDE, beige RoHSitem number: A 913
- Optimal cooling due to 1 rear fan
- Cableless connection
- Magic handle - auto in/out
ST-135 SAS&SATA, Alu updated black RoHSitem number: A 1086
- Compatible with both SATA or SAS 3,5 HDD
- SAS II, SAS I, SATA-III, SATA-II, SATA-I / up to 6.0 Gbit/s
- Optimal cooling due to 1 x 4cm front fan
- Cableless connection
- Magic handle - auto in/out
- New version
ST-136SS SATA & SAS black updated RoHSitem number: A 1437
- Compatible with both SATA or SAS 2,5 / 3,5 HDD
- Optimal ventilation due to 8cm turbo cooling fan
- Cableless HDD connection
- Aluminum design
ST-166TL SATA/SAS trayless Mobile Rack blackitem number: A 2155
- Silver aluminum-body
- Trayless design for 3.5" HDD
- Triangle metal key-lock design
- Support SATA I / II / III, SAS I,II
- 15 pin SATA power connector
- With HDD LED switch
- With extra power slot for optional fan
- Fanless design to keep HDD stable
Industrial Products / Rackmount / 4U
JJ-R42328 4U 16x3,5" HDD+12x2,5"HDD IPC Case+Backpl.moduleitem number: A 2510
- For 4U 19" Rackmount chassis
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- MiniSAS connector x 7
- Full SAS dual channel
- With anti-vibration spring on the front tray and plastic cushion points on both side-tray
This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module. The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage. It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD
This storage chassis has been designed for hosting 16 x 3,5" or 2,5" HDD + 12 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-R42336 4U 12x3,5" HDD+24x2,5"HDD IPC Case+Backpl.moduleitem number: A 2511
- For 4U 19" Rackmount chassis
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- MiniSAS connector x 9
- Full SAS dual channel
- With anti-vibration spring on the front tray and plastic cushion points on both side-tray
This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module. The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage. It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD
This storage chassis has been designed for hosting 12 x 3,5" or 2,5" HDD + 24 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-R4248 4U 48x2,5" HDD IPC Case+Backpl.moduleitem number: A 2508
- For 4U 19" Rackmount chassis
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- MiniSAS connector x 12
- Full SAS dual channel
- With anti-vibration spring on the front tray and plastic cushion points on both side-tray
This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module. The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage. It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs
This storage chassis has been designed for hosting 48 x 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
JJ-R4324 4U 24x3,5" HDD IPC Case+Backpl.moduleitem number: A 2509
- For 4U 19" Rackmount chassis
- Support SAS I / II / III, SATA I / II / III, 6Gbps / 12Gbps compatible design!
- MiniSAS connector x 6
- Full SAS dual channel
- With anti-vibration spring on the front tray and plastic cushion points on both side-tray
This rackmount chassis meets the increasing demand in data storage requirements with its first 19" rackmount server storage module. The first storage module for 19" rackmount server storage chassis that fulfills the demand for different applications, such as surveillance, data backup center, enterprise storage system, video post-production and the cloud storage. It offers a convenient easy swap in/out hard drives for data backup, duplication, security, audio/video post-production, surveillance storage solutions and transporation.
Features of the Storage Module - Organized group for miniSAS connections - Digital numbers for group or RAID organizing - LED indications for power, accessing and overheating - Air-ventilation holes design on the front panel, PCB and the bottom side - Horizontal way PCB design for volume hot air to pass through - Flexable to change HDD modules on rackmount chassis - Easy swap in/out between the group HDDs - Combination backplane modules with 3.5" HDD and 2.5" HDD
This storage chassis has been designed for hosting 24 x 3,5" or 2,5" HDD and offers a safe and with maximum performance data center with the reliability and robustness for large-scale replicated environments on your storage system solutions.
This industrial level Module is the ideal solution for buildig storage & system safe, ist the most convenient, is faster & effective!
NU-R9400D40S 4U Rackmount Short / Blackitem number: A 2474
- 4U up to ATX size motherboard
- 7 x full height PCI slots
- 4 x 5,25 ext. + 4 x 2,5 + 2 x 3,5 int.
- Easy removable and washable dust filter
- 4 x 80mm ball bearing fans
- Support PS2, PS3 and mini red. PSU Despite its space saving design, this 4U rackmount chassis with only 16 depth, includes four fans, two front USB, four 5.25” open bay and four 3.5” or eight 2.5" hidden bays and comes with 7 full height PCI slots. This chassis can host PS2, PS3 and mini-redundant power supply format and it supports different versions of standard ATX, micro ATX or mini ITX motherboards. Customization It features four 5.25" open bays, four 3.5" or eight 2.5" hidden bay with HDD bracket for custom configuration of different applications. The 7 full height PCI slots support PCI, PCI 64bits, AGP, and PCI-Express add-on cards which enable expansion and upgrades for specialized functions and tasks. Dust Filter The chassis includes an easy way to clean up the filter from dust and dirt that may hinder the optimal operation in your server chassis. The washable filter is strategically placed behind the fans in front of the chassis just behind the front bezel. Cooling Fans The chassis is equipped with 2x 80mm front and 2x 80mm rear fans to provide cool air intake to extend the lifecyle of the internal components of the system.
NU-R9401 4U 19item number: V0000125
- With 14-Slot rear panel
- Removable air filter
- Add-on cards retainer
NU-R9401B 4U 19item number: V0000129
- With 14-Slot rear panel
- Removable air filter