Industrial Products / Backplane / For 2,5" HDD
JJ-N-2937NVMe16 / 2x2,5" NVMe U.2 +3x2,5"12G HDD/SSD+Bracitem number: A 2701
- For 2 x 2.5” NVMe HDD/SSD up to 15mm height + 3 x 2.5 HDD/SSD up to 9.5mm (12Gbps)
- For SATA I, II, III & SAS I, II, III (12Gbps)
- MiniSAS HD (SFF8643) Connector x 2
- 7pin SATA Connector x 3
- 15pin Power Connector x 2
- 3pin Cooling fan jumper x 2
- Metal keylock design
- Metal Frame & Stainless HDD Tray
JJ-N-29NVMe NVMe U.2 SSD (32Gbps) RoHSitem number: A 2706
- Half 5.25" Drive bay width size
- For 2 x 2.5” NVMe U.2 SSD
- For up to 15mm height
- MiniSAS HD (SFF-8643) connector x 2
- 15pin Power connector x 1
- 3pin Cooling fan jumper x 1
- Metal key lock design
- Not including 5.25" bracket mounting kit
JJ-N-29SS15 12G SATA+SAS 2x2,5"HDD/SSD + bracketitem number: A 2692
- Half 5.25" Drive bay width size
- For 2 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 15mm height HDD/SSD
- 7pin SATA ports x 2
- 15pin Power port x 1
- Metal key lock design
- Including 5.25" bracket mounting kit
JJ-N-37SS 12G SATA+SAS 3x2,5"HDD/SSDitem number: A 2683
- Half 5.25" Drive bay width size
- For 3 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 10mm height HDD/SSD
- 7pin SATA ports x 3
- 15pin Power port x 1
- Metal key lock design
JJ-N-48SS 12G SATA+SAS 4x2,5"HDD/SSDitem number: A 2684
- Half 5.25" Drive bay width size
- For 4 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 7mm height HDD/SSD
- 7pin SATA ports x 4
- 15pin Power port x 1
- Metal key lock design
JJ-N-49NVMS NVMe U.2 SSD (SlimSAS) SFF-8654item number: A 2813
- For 4 x 2.5" NVMe U.2 HDD/SSD
- SlimSAS SFF-8654 Connector x 4
- For SSD Type U.2 / U.3 (with Dual Mode)
- M.2 (with M2U03 adapter) 2230 / 2242 / 2260 / 2280
- Transfer Rate PCIe3.0/4.0 32/64Gbps
- 15pin power connector x 2
- Cableless HDD connection
- Incl. 40 x 40 x 20mm rear fans x 2
- Metal keylock design
- Metal frame & stainless HDD Tray
- Easy drives swap in / out
JJ-GM3-102M2-Fr/Slimline SAS(SFF-8654) 1x3.5" for 2xM.2item number: A 2784
- 4x Slimline SAS (SFF-8654) 4i connector x 2
- Support PCIe 3.0/PCIe 4.0
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 2
- 2pin fan jumper x 1
- Support SSD length 30/42/60/80mm
- Tool-less installation, or build-in screw
- With heat sink & thermal pad and 6cm cooling fan
- Keylock design
JJ-GM3-202M2r/Slimline SAS(SFF-8654) 1x3.5" for 4 x M.2item number: A 2814
- 4 x SlimSAS (SFF-8654) 4i connector
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- 4 x Mini 4pin power connector + 2pin fan connector x 4
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
JJ-GMS-104M2r/Slimline(SFF-8654) Half 5.25" for 4 x M.2item number: A 2816
- 4 x SlimSAS (SFF-8654) 4i connector
- Support 4 x M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Support M.2 SSD length 2230/2242/2260/2280mm
- 1 x Mini 4pin power connector
- With 4010mm blower fan x 1 for quick heat dissipation
- With anti-vibration spring design on each swapping carrier
- Slim size aluminum frame with stainless carrier
- Aluminum cover, with thermal pads on upper & lower sides of the carrier
- Keylock design
JJ-GO3-202M2r/ Oculink (SFF-8611) 1x3.5" for 4 x M.2 NVMeitem number: A 2815
- 4 x Oculink (SFF-8611) 4i connector
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- 4 x Mini 4pin power connector + 2pin fan connector x 4
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
Industrial Products / Mobile Rack / For 3,5" HDD
JJ-N-19NVMe19 / 1 x 2,5" NVMe U.2 in 1 x 3,5" bayitem number: A 2786
- 8643)
- For 1 x 2.5” NVMe U.2 SSD (PCIe3.0/4.0 x4) upto 15mm height
- For 1 x 3,5" Drive bay width size
- Support PCIe3.0/4.0 X4 upto 32/64Gbps
- MiniSAS HD (SFF-8643) connector x 1
- 15pin Power Connector x 1
- Metal key lock design
- Including 3,5" bracket mounting kit
- Can host M.2 NVMe SSD (needs optional adapter JJ-M2U03)
JJ-GMP-102M2r/Slimline SAS(SFF-8654) PCIe Slot f. 2xM.2item number: A 2755
- PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD Slimline SAS
- Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
- M.2 NVMe SSD length 30/42/60/80mm
- 2 x Slimline SAS (SFF-8654) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
- Tray: Slimline SAS x8 connector
- With triangle metal keylock design
- With anti-vibration springs
- Stainless frame/tray and aluminum heatsink and front bezel
- Adjustable tool-less standoff
- LED x 1 for Power on : solid green / Accessing : Orange blinking
- Tool-less aluminum heat sink and thermal pads
- Dim: 159mm x 120.5mm x 18.5mm
- Weight : 330g
- Cables are not included
NB: The Hot Swap function depends on the mainboard
Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
JJ-GOP-102M2r / OCuLink(SFF-8612) PCIe Slot f. 2xM.2 NVMeitem number: A 2756
- PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD
- Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
- M.2 NVMe SSD length 30/42/60/80mm
- 2 x OCuLink (SFF-8611) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
- Tray: Slimline SAS x8 connector
- With triangle metal keylock design
- With anti-vibration springs
- Stainless frame/tray and aluminum heatsink and front bezel
- Adjustable tool-less standoff
- LED x 1 for Power on : solid green / Accessing : Orange blinking
- Tool-less aluminum heat sink and thermal pads
- Dim: 159mm x 120.5mm x 18.5mm
- Weight : 330g
- Cables are not included
NB: The Hot Swap function depends on the mainboard
Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
JJ-GP-101M2-Br M.2 NVMe PCIe Adapteritem number: A 2752
- With PCIe Full height adapter + Low profile bracket adapter
- PCIe Brackets with swap in/out tray for 1 x M.2 SSD
- For 1 x M.2 NVMe SSD (length 30/42/60/80mm)
- PCIe 3.0/4.0 x4 NVMe M.2 M key SSD
- Support 1 x PCIe 3.0 / PCIe 4.0 M.2 NVMe SSD with M key (PCIe 3.0/4.0 x4) or B+M Key (PCIe 3.0 x2)
- With triangle metal keylock design
- With anti-vibration springs on the tray
- Stainless frame/tray and aluminum front bezel
- LED x 1 : Power on : Blue & Accessing : Purple blinking
- Heat sink pad and aluminum heat sink cover
- Dim: 167.3mm x 120.8mm x 19mm [Full height bracket]
- Dim: 167.3mm x 84mm x 19mm [Low profile bracket ]
- Weight : 115g
NB: The Hot Swap function depends on the mainboard
JJ-GP-101M2-Br connects the M.2 via PCIe Bus but the NVMe hot-swap function in PCIe Bus ist still limited and depends on the mainboard.
Only when the PCIe Bus on mainboard provides the hotplug function, the JJ-GP-101M2-Br can support the hot swap function.
If NOT, please power OFF the system BEFORE swap in/out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
If you need the hot swap function please refer to other models, or to the suggested NVMe HBA / RAID card information.
Storage / Mobile Rack / For 2,5" HDD
JJ-N-19NVMe19 / 1 x 2,5" NVMe U.2 in 1 x 3,5" bayitem number: A 2786
- 8643)
- For 1 x 2.5” NVMe U.2 SSD (PCIe3.0/4.0 x4) upto 15mm height
- For 1 x 3,5" Drive bay width size
- Support PCIe3.0/4.0 X4 upto 32/64Gbps
- MiniSAS HD (SFF-8643) connector x 1
- 15pin Power Connector x 1
- Metal key lock design
- Including 3,5" bracket mounting kit
- Can host M.2 NVMe SSD (needs optional adapter JJ-M2U03)
Storage / Mobile Rack / For M.2
JJ-GMP-102M2r/Slimline SAS(SFF-8654) PCIe Slot f. 2xM.2item number: A 2755
- PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD Slimline SAS
- Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
- M.2 NVMe SSD length 30/42/60/80mm
- 2 x Slimline SAS (SFF-8654) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
- Tray: Slimline SAS x8 connector
- With triangle metal keylock design
- With anti-vibration springs
- Stainless frame/tray and aluminum heatsink and front bezel
- Adjustable tool-less standoff
- LED x 1 for Power on : solid green / Accessing : Orange blinking
- Tool-less aluminum heat sink and thermal pads
- Dim: 159mm x 120.5mm x 18.5mm
- Weight : 330g
- Cables are not included
NB: The Hot Swap function depends on the mainboard
Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
JJ-GOP-102M2r / OCuLink(SFF-8612) PCIe Slot f. 2xM.2 NVMeitem number: A 2756
- PCIe Slot (Full-height) with swap in/out tray for 2 x M.2 SSD
- Support 2x M.2 NVMe SSD with M-Key PCIe 3.0/4.0 x4 or B+M-Key PCIe 3.0 x2
- M.2 NVMe SSD length 30/42/60/80mm
- 2 x OCuLink (SFF-8611) 4i connectors (SFF-9402 rev1.1 spec.), 2 x mini 4pin power connectors, 2 x 2pin fan jumper (pitch 2.5)
- Tray: Slimline SAS x8 connector
- With triangle metal keylock design
- With anti-vibration springs
- Stainless frame/tray and aluminum heatsink and front bezel
- Adjustable tool-less standoff
- LED x 1 for Power on : solid green / Accessing : Orange blinking
- Tool-less aluminum heat sink and thermal pads
- Dim: 159mm x 120.5mm x 18.5mm
- Weight : 330g
- Cables are not included
NB: The Hot Swap function depends on the mainboard
Only if the mainboard provides the hotplug function, the item can support this function. Because most of NVMe motherboards provide limited hot-plug, we suggest to use a PCIe 3.0 or 4.0 NVMe HBA card, or NVMe RAID card to enjoy NVMe hot-swap
If your system environment does NOT support NVMe hot-plugging, you must turn OFF the power of the system BEFORE you pull out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
JJ-GP-101M2-Br M.2 NVMe PCIe Adapteritem number: A 2752
- With PCIe Full height adapter + Low profile bracket adapter
- PCIe Brackets with swap in/out tray for 1 x M.2 SSD
- For 1 x M.2 NVMe SSD (length 30/42/60/80mm)
- PCIe 3.0/4.0 x4 NVMe M.2 M key SSD
- Support 1 x PCIe 3.0 / PCIe 4.0 M.2 NVMe SSD with M key (PCIe 3.0/4.0 x4) or B+M Key (PCIe 3.0 x2)
- With triangle metal keylock design
- With anti-vibration springs on the tray
- Stainless frame/tray and aluminum front bezel
- LED x 1 : Power on : Blue & Accessing : Purple blinking
- Heat sink pad and aluminum heat sink cover
- Dim: 167.3mm x 120.8mm x 19mm [Full height bracket]
- Dim: 167.3mm x 84mm x 19mm [Low profile bracket ]
- Weight : 115g
NB: The Hot Swap function depends on the mainboard
JJ-GP-101M2-Br connects the M.2 via PCIe Bus but the NVMe hot-swap function in PCIe Bus ist still limited and depends on the mainboard.
Only when the PCIe Bus on mainboard provides the hotplug function, the JJ-GP-101M2-Br can support the hot swap function.
If NOT, please power OFF the system BEFORE swap in/out the installed NVMe M.2 SSD to avoid unexpected failure in the system.
If you need the hot swap function please refer to other models, or to the suggested NVMe HBA / RAID card information.
Storage / Backplane / For 2,5" HDD
JJ-N-2937NVMe16 / 2x2,5" NVMe U.2 +3x2,5"12G HDD/SSD+Bracitem number: A 2701
- For 2 x 2.5” NVMe HDD/SSD up to 15mm height + 3 x 2.5 HDD/SSD up to 9.5mm (12Gbps)
- For SATA I, II, III & SAS I, II, III (12Gbps)
- MiniSAS HD (SFF8643) Connector x 2
- 7pin SATA Connector x 3
- 15pin Power Connector x 2
- 3pin Cooling fan jumper x 2
- Metal keylock design
- Metal Frame & Stainless HDD Tray
JJ-N-29NVMe NVMe U.2 SSD (32Gbps) RoHSitem number: A 2706
- Half 5.25" Drive bay width size
- For 2 x 2.5” NVMe U.2 SSD
- For up to 15mm height
- MiniSAS HD (SFF-8643) connector x 2
- 15pin Power connector x 1
- 3pin Cooling fan jumper x 1
- Metal key lock design
- Not including 5.25" bracket mounting kit
JJ-N-29SS15 12G SATA+SAS 2x2,5"HDD/SSD + bracketitem number: A 2692
- Half 5.25" Drive bay width size
- For 2 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 15mm height HDD/SSD
- 7pin SATA ports x 2
- 15pin Power port x 1
- Metal key lock design
- Including 5.25" bracket mounting kit
JJ-N-37SS 12G SATA+SAS 3x2,5"HDD/SSDitem number: A 2683
- Half 5.25" Drive bay width size
- For 3 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 10mm height HDD/SSD
- 7pin SATA ports x 3
- 15pin Power port x 1
- Metal key lock design
JJ-N-48SS 12G SATA+SAS 4x2,5"HDD/SSDitem number: A 2684
- Half 5.25" Drive bay width size
- For 4 x 2.5” SATA I, II, III (6G) or SAS I, II, III (12G) HDD/SSD
- For up to 7mm height HDD/SSD
- 7pin SATA ports x 4
- 15pin Power port x 1
- Metal key lock design
JJ-N-49NVMS NVMe U.2 SSD (SlimSAS) SFF-8654item number: A 2813
- For 4 x 2.5" NVMe U.2 HDD/SSD
- SlimSAS SFF-8654 Connector x 4
- For SSD Type U.2 / U.3 (with Dual Mode)
- M.2 (with M2U03 adapter) 2230 / 2242 / 2260 / 2280
- Transfer Rate PCIe3.0/4.0 32/64Gbps
- 15pin power connector x 2
- Cableless HDD connection
- Incl. 40 x 40 x 20mm rear fans x 2
- Metal keylock design
- Metal frame & stainless HDD Tray
- Easy drives swap in / out
Storage / Backplane / For M.2
JJ-GM3-102M2-Fr/Slimline SAS(SFF-8654) 1x3.5" for 2xM.2item number: A 2784
- 4x Slimline SAS (SFF-8654) 4i connector x 2
- Support PCIe 3.0/PCIe 4.0
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Small 4pin power connector x 2
- 2pin fan jumper x 1
- Support SSD length 30/42/60/80mm
- Tool-less installation, or build-in screw
- With heat sink & thermal pad and 6cm cooling fan
- Keylock design
JJ-GM3-202M2r/Slimline SAS(SFF-8654) 1x3.5" for 4 x M.2item number: A 2814
- 4 x SlimSAS (SFF-8654) 4i connector
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- 4 x Mini 4pin power connector + 2pin fan connector x 4
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
JJ-GMS-104M2r/Slimline(SFF-8654) Half 5.25" for 4 x M.2item number: A 2816
- 4 x SlimSAS (SFF-8654) 4i connector
- Support 4 x M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- Support M.2 SSD length 2230/2242/2260/2280mm
- 1 x Mini 4pin power connector
- With 4010mm blower fan x 1 for quick heat dissipation
- With anti-vibration spring design on each swapping carrier
- Slim size aluminum frame with stainless carrier
- Aluminum cover, with thermal pads on upper & lower sides of the carrier
- Keylock design
JJ-GO3-202M2r/ Oculink (SFF-8611) 1x3.5" for 4 x M.2 NVMeitem number: A 2815
- 4 x Oculink (SFF-8611) 4i connector
- Support M.2 NVMe SSD (M-Key) PCIe 3.0/PCIe 4.0 x4
- Support GEN3 (32Gbps) and GEN4 (64Gbps)
- 4 x Mini 4pin power connector + 2pin fan connector x 4
- Support M.2 SSD length 2230/2242/2260/2280mm
- Tool-less installation, or build-in screw
- Aluminum frame + stainless tray with aluminum front bezel
- With aluminum heat sink & thermal pad on the M.2 SSD carrier
- Keylock design
CPU Cooler / AMD / Socket SP6 - 1U
Cooler A51 AMD SP6/TR5 - 1U Passive RoHSitem number: A 2818
- For AMD® Threadripper/AMD® Threadripper PRO 7000/AMD® EPYC™ Processor
- For Socket SP6/TR5
- Copper 1100 with Stacked Fin
- Max power: 250W
- Disclaimer: All product specifications and product images are subject to change without notice
Cooler A52 AMD SP6 - 1U Active RoHSitem number: A 2795
- AMD® EPYC™ SP6 / TR5
- Recommend for AMD® EPYC™ Processors
- Copper1100 Heatsink with Vapor Chamber Base
- Active Cooler with PWM for 1U Server
- 140W TDP
- Disclaimer: All product specifications and product images are subject to change without notice
CPU Cooler / AMD / Socket SP6 - 2U
Cooler A54 AMD SP6 - 2U Active RoHSitem number: A 2796
- AMD® EPYC™ SP6 / TR5
- Recommend for AMD® THREADRIPPER / AMD® THREADRIPPER PRO 7000 / AMD® EPYC™ Processor
- Aluminum Heatsink with Heatpipe Embedded
- Active Cooler with PWM for 2U Server & up
- TDP/Turbo 225W (SP6) / 350W (sTR5)
- Disclaimer: All product specifications and product images are subject to change without notice
CPU Cooler / AMD / Socket SP6 - 3U
Cooler A55 AMD SP6 - 3U Active RoHSitem number: A 2797
- AMD® EPYC™ SP6 / TR5
- Recommend for AMD® THREADRIPPER / AMD® THREADRIPPER PRO 7000 / AMD® EPYC™ Processor
- Aluminum Heatsink with Heatpipe Embedded
- Active Cooler with PWM for 3U Server & up
- TDP/Turbo 225W (SP6) / 350W (sTR5)
- Disclaimer: All product specifications and product images are subject to change without notice
CPU Cooler / Intel / Socket 7529 - 2U
Cooler C1 Intel 7529 - 2U Passive RoHSitem number: A 2799
- LGA 7529
- Recommend for Intel® Granite Rapid AP Processor
- Aluminum Fin with Heat Pipe
- Up to TDP 450W
Cooler C2 Intel 7529 - 2U Active RoHSitem number: A 2800
- LGA 7529
- Recommend for Intel® Granite Rapid AP Processor
- Aluminum Stacked-fin with Heat Pipes directly contact CPU
- Up to TDP 400W
CPU Cooler / Intel / Socket 1700 - 2U
Cooler Z60 Intel 1700 - 1.5U Active RoHSitem number: A 2798
- LGA 1851/1700
- Aluminum 6063-T5 Extuded Radial Fin Heat Sink
- Up to TDP 65W
- Screw mounting type
- Disclaimer: All product specifications and product images are subject to change without notice
CPU Cooler / Intel / Socket 4926 - 2U
Cooler W1 Intel 4926 - 2U Active RoHSitem number: A 2801
- LGA 4926
- Recommend for Ampere® Altra® Family
- Aluminum and Copper Heatsink Base with Heatpipe and Aluminum Fins
- Up to TDP 250W
CPU Cooler / Watercooling / 1U
Cooler L37 Water Cooling LGA 7529 for 1Uitem number: A 2807
- For Intel® Granite Rapid SP Processors
- Support CPU power up to 500W
- For 1U Server and up
- Coldplate Module with Copper Base
- 5 x 4cm cooling fans with 4-Pin PWM connector
- Each fan should have its own fan header due to high current consumption at full speed
- Mounting accessories are included
CPU Cooler / Watercooling / 2U & up
Cooler L35 Water Cooling Multi Socket for 2U&upitem number: A 2780
- For Intel and AMD
- Support MAXIMUM POWER Intel – 305W /AMD – 210W
- For 2U Server and up
- Liquid Cooling Solution recommended for CPU: - Intel Socket LGA 1200/115x - Intel Socket LGA 1851/1700 - Intel Socket LGA 1356/1366 - Intel Socket LGA 2011/2066, Square ILM Mounting - Support maximum power: Intel 305W / AMD 230W - AMD Processor, Socket AM4 / AM5 / FM2+ / FM2 / AM2 / AM2+ / AM3 / AM3+ / FM1 - With Maximum 8000rpm Fan Speed